Oak veneered MDF board, 6 mm Acom/B 2.80×2.07 m
Dear customers! Please note that minimum order — is 1 sheet!
For example, sheet length = 2.80 m, width = 2.07 m (2.80 * 2.07 = 5.8 m2)
| Thickness | 6 mm |
| Length | 2.80 m |
| Width | 2.07 m |
| Board type | pressed |
| Surface finish | oak veneer |
| Finish grade | Acom/B (face/back) |
| Moisture content | up to 8% |
| Formaldehyde emission class | E1 |
| Origin | Ukraine |
We provide a full range of wood processing services
MDF board veneering
We offer high-quality board materials faced with sliced veneer. Natural veneer and eco-friendly adhesive are used for finishing MDF, chipboard, plywood, and blockboard surfaces. You receive a high-quality veneered board ready for manufacturing cabinet furniture, wall panels, and doors.
Choose oak veneered MDF
Natural veneer matching methods
Veneer matching: book match (mirror)
The veneer face is assembled from a single flitch (bundle). To create a book-matched pattern, every second veneer leaf is flipped 180° back-side up.
Veneer matching: slip match
The veneer face is assembled from a single veneer pack. Each consecutive sheet is laid without flipping.
Veneer face matching: Book match
The veneer face is assembled from a single veneer pack. The pattern is formed by flipping every second sheet lengthwise by 180°, back side facing up.
Veneer face matching: Reverse match
The veneer face is assembled from a single veneer pack. The pattern is created by rotating every other sheet by 180° with the face side up. Reverse matching ensures a uniform grain pattern and tone across the panel.
Veneer face matching: Mixed match
The veneer face is assembled from several veneer packs. Sheets are chosen randomly: from the same or different cuts, with or without tone consistency. The pattern is created according to the customer’s preferences.
Veneer face matching: Mismatch
The veneer face is assembled from packs of veneer from the same log. Sheets with matching coloration but varying grain textures are combined.
Cutting layout and cutting of oak veneered MDF boards
A properly prepared cutting layout allows you to produce parts of the required dimensions and calculate the exact amount of material needed. A cutting diagram helps prevent errors when cutting veneered panels and speeds up the production process. The technical documentation takes into account the specifics of cutting faced MDF. For instance, before cutting, the board is trimmed along the perimeter by approximately 1 cm to eliminate potential manufacturing irregularities and square the edges. Additionally, the saw kerf takes up about 3 mm, and edge-banded parts must be reduced by 2 mm on each edge.
Our specialists provide detailed part planning with grain pattern matching and perform high-quality cutting of veneered MDF panels without chipping or other defects.
Order a cutting layout for veneered MDF panels
Order cutting for veneered MDF panels
Edge banding parts with natural wood veneer
Edge banding using industrial machinery ensures edge protection and gives the finished product a refined look. We offer edge banding both unglued and pre-glued. Edge banding with widths of 22 mm and 44 mm and a thickness of 0.5 mm is in stock. Custom production of edge banding in non-standard widths (from 60 mm to 270 mm) and thicknesses (1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm) is also available.
Buy oak veneer furniture edge banding
Application examples of oak veneered MDF panels
Veneered MDF boards are widely used in cabinet and case furniture manufacturing. Products made from this composite material boast dimensional stability, eco-safety, and a long service life. Natural oak veneer finishing lends a polished look to desks, nightstands, wardrobes, shelving units, dressers, and vanity tables.
Oak veneered MDF is used to create wall and ceiling panels. Such wall and ceiling claddings are ideal for home offices, libraries, as well as bedrooms and living rooms. These natural wood-faced panels are also used to manufacture doors, partitions, stair handrails, cornices, and other architectural elements.
Watch a video review of our oak veneered MDF boards on our YouTube channel!
You can check our full product range, current prices, and availability by downloading our price list.
You can buy oak veneered MDF boards from our warehouse in Kyiv. Fast shipping of veneered MDF panels via Nova Poshta to Odesa, Cherkasy, Lviv, Ternopil, Zhytomyr, Sumy, Chernihiv, Chernivtsi, Kropyvnytskyi, Poltava, Dnipro, Zaporizhzhia, Kharkiv, Ivano-Frankivsk, Kherson, Mykolaiv, Vinnytsia, Rivne, Lutsk, Khmelnytskyi, Uzhhorod, Bila Tserkva, Boryspil, Brovary, Vasylkiv, Stryi, Vyshneve, Irpin, Obukhiv, Kalush, Fastiv, Drohobych, Chervonohrad, Sambir, Boryslav, Kolomyia, and other locations across Ukraine.
