---
title: Full-Stave Ash Solid Wood Panel, 40 mm, 1.2x0.8 m, Rustic
url: https://wood-way.expert/en/shop/solid-wood-panels/ash-solid-wood-panels/full-stave-ash-solid-wood-panels/full-stave-ash-solid-wood-panel-40mm-1-2x0-8m-rustic/
lang: en
site: WoodWay Expert
generated: 2026-09-04T21:44:31+00:00
---

# Full-Stave Ash Solid Wood Panel, 40 mm, 1.2x0.8 m, Rustic

- SKU: 9722
- Stock: In stock
- Categories: [Ash Solid Wood Panels](https://wood-way.expert/en/product-category/solid-wood-panels/ash-solid-wood-panels/), [Full-stave Ash Solid Wood Panels](https://wood-way.expert/en/product-category/solid-wood-panels/ash-solid-wood-panels/full-stave-ash-solid-wood-panels/), [Solid Wood Panels](https://wood-way.expert/en/product-category/solid-wood-panels/)

**3 212 ₴ / sheet (64,99 € / m²)**

Rustic grade (C) full-stave ash edge-glued panels with a thickness of 40 mm and dimensions of 1.2 m x 0.8 m showcase the natural character and beauty of raw timber: healthy knots, natural colour variations, and a distinct wood grain texture are prominent on the surface. The material is widely used for furniture production, stairs, and windowsills in Loft, Country, and Rustic styles. The substantial thickness ensures product reliability and high warp resistance even under intensive structural loads. Orders can be collected via warehouse self-pickup, and shipping across Ukraine is available. Materials are sold by the piece and in bulk wholesale quantities.

## Advantages of Full-stave Ash Edge-glued Panels

Solid-lamella edge-glued panels (EGP) are a premium variety of timber boards manufactured by bonding lamellas (staves) exclusively along their width. Unlike finger-jointed panels, each lamella in such a panel is continuous and runs through the entire length of the board.

1. Aesthetic qualities. The primary feature of solid-lamella panels is their visual appeal. Since the lamellas are uninterrupted along their length, the material conveys the natural grain pattern as accurately as possible. When selecting segments for solid-lamella panels, rigorous attention is paid to colour grading to ensure seamless tonal transitions and a sophisticated appearance.
2. Finish quality. Due to the absence of transverse glue joints (finger joints), the surface appears monolithic after coating, lacquering, or oiling. This ensures a high-end finish that is particularly valued in premium furniture manufacturing and interior design.
3. Durability and repairability. The thickness and structural uniformity of the lamellas allow the product to be sanded and refinished multiple times over decades. This maintenance can be performed without the risk of exposing internal joints or compromising the integrity of the board, ensuring long-term durability.

Solid-stave ash edge-glued panels allow for the creation of products that retain an attractive visual appearance and functionality over an extended service life. This edge-glued board material is chosen for projects where natural wood aesthetics, durability, and refinishing capability are essential.

## Ash Edge-Glued Panel Grades

The grade of an edge-glued panel determines the visual quality of the material rather than its strength or stability. The classification is based on permitted natural wood features and the quality of the stave bonding. The difference between panel grades is purely aesthetic and dictates the area of application.

| I (A) | The surface is virtually uniform in texture and colour. Occasional small white knots are permitted. Free from sapwood and other features. Typically used in the furniture industry for exclusive sets. |
| --- | --- |
| II (B) | Small sound knots are permitted. Moderate tone variations and a more active wood grain are possible. Suitable for carcase furniture, shelving, and worktops. |
| III (C) | Contains various types of knots, sapwood, and high-contrast textures. These panels are usually painted, laminated, or used for designer products in rustic, eco, country, or loft styles. |

## Applications of Edge-Glued Panels

### Work Surfaces and Worktops

This is the primary application for the material. The stable structure of the panel allows for the manufacture of home furniture, including dining tables, desks, and coffee tables. The glued structure makes it an optimal choice for kitchen worktops, where resistance to daily wear is critical. Panels are also used to create bar counters, kitchen islands, reception desks, and retail counters.

### Staircase Components

Edge-glued panels are an ideal material for structures subject to constant mechanical stress. They are used to produce treads, landings, and handrails. Glued timber withstands static and dynamic loads significantly better than solid wood.

### Window Sills

Using panels for window sills is a popular solution for residential flats, office centres, and conference halls. Unlike solid boards, a panel-based window sill does not deform under the influence of warm air from radiators or moisture from windows. The surface is treated with protective coatings.

### Carcase Furniture and Storage Systems

This structural material is used to create durable storage systems. Shelves and racking made from edge-glued panels can support the significant weight of books, decor, or kitchenware. They are also used for cabinet doors, chests of drawers, sideboards, and tall storage units.

### Chairs, Benches, and Interior Decor

The strength of the adhesive bond allows for the creation of reliable hallway benches, stools, and bar chairs. Timber stave panels can also be used as interior wall cladding, screens, or partitions for space zoning.

## Custom Manufacturing of Edge-Glued Panels

We accept bespoke orders for the production of custom-engineered edge-glued panels tailored to your specifications. Product specifications are as follows:

- Construction type: Full stave (continuous lamella) or finger-jointed.
- Wood species: Oak, Ash, Pine.
- Thickness: 20 mm, 27 mm, 40 mm.
- Grade: A, B, A/B (according to international grading standards).
- Moisture content: 8-10% (kiln-dried).
- Dimensional variety: A single order can include panels of both uniform and varying formats.
- Surface finish options:

- Uncoated (raw) panel.
- Pre-sanded for painting (120 grit).
- Finished with lacquer, paint, oil, or tinting. The cost of the final coating is calculated individually upon request.

### Ordering Terms:

- We accept orders starting from 5-10 units. Wholesale pricing applies to volumes from 3 m³.
- Lead time for production is typically between 14 and 20 working days.
- Standard shipping is handled on pallets. Individual shrink-wrapping of each panel is available upon request (for an additional fee) to provide maximum protection against humidity and damage during transport.

Please submit a request to our managers — they will contact you to provide a detailed consultation.

## Manufacturing Stages of Edge-Glued Panels

1. Raw Material Selection. Only high-quality kiln-dried boards are selected for production. Timber with a moisture content of 8-10% provides the essential foundation for stable, warp-resistant panel materials.
2. Sawing. Solid timber is ripped into blanks—lamellas of a specific width. These staves are then meticulously sorted. Segments with knots, cracks, wormholes, or other natural defects are either rejected or sent for defect removal. The selected lamellas are calibrated on four sides (S4S). For finger-jointed panels, a precision finger joint profile is milled into the ends of short staves before they are joined under a hydraulic press.
3. Panel Formation. Lamellas are laid out according to a specific structural pattern: the grain direction in adjacent segments must be reversed (alternated). Staves are also color-matched to ensure aesthetic consistency in texture and tone.
4. Gluing. Lamellas are joined using industrial D3 or D4 class wood adhesives, applied evenly to the edges. The assembled panel is then processed in a high-pressure press to ensure a permanent bond.
5. Calibration and Sanding. Once the adhesive is fully cured, the panels undergo final calibration and professional sanding. This results in a smooth surface ready for lacquering, tinting, or oil treatments.

## Why is an Ash Panel More Stable Than Solid Wood?

The primary challenge with solid timber is its hygroscopicity. Solid wood naturally absorbs and releases moisture, which often leads to warping, cupping, and cracking. An edge-glued panel resolves these issues through three technical factors:

1. Internal Stress Compensation. In a solid board, wood fibers run in a single direction. If the board begins to warp during seasonal drying, the entire piece deforms. In an edge-glued panel, lamellas are oriented so that their grains counteract each other. The internal tension of one lamella is balanced by the resistance of the adjacent one.
2. Absence of Critical Fracture Points. Cracks in timber typically propagate along the grain. Since a panel consists of separate, bonded segments, a micro-crack appearing in one lamella cannot physically transfer to the next. The glue line acts as a structural barrier.
3. Uniform Reaction to Humidity. Because the panel consists of narrow, engineered lamellas, each element reacts to humidity changes more predictably and subtly. This significantly reduces internal tension and minimizes the risk of dimensional distortion.

In summary, an ash edge-glued panel is technically superior to solid wood for high-end furniture and joinery because its construction compensates for the natural hygroscopicity of timber. The multi-directional grain of the lamellas neutralizes stress, glue joints block the spread of defects, and the narrow elements ensure long-term dimensional stability.

## Ash Timber: Key Parameters

Ash (Fraxinus excelsior) is a valuable hardwood from the temperate zone. It is classified as a heavy and hard wood species. The density at standard moisture content (12%) is approximately 680–750 kg/m³, with a Brinell hardness rating of 4.

The main advantage of ash is its exceptional toughness and flexibility after steaming, which makes the material indispensable for the production of curved furniture and sports equipment.

Ash timber has a distinct texture with large pores. The sapwood is wide and light white or yellowish in colour. The heartwood is light brown, sometimes with an olive tint (known as "olive ash"). The texture features a characteristic annual ring pattern, and the grain is typically straight.

Due to its high hardness, ash requires sharp cutting tools, as it is prone to tearing or "fuzzing". The wood is easy to sand and polish and holds fixings (screws, nails) securely. It takes stains and oils well, which effectively highlights the surface texture.

Choose the edge-glued panels of the required thickness and dimensions, then add them to your cart, request a quote, or call us: +380 (67) 180-38-13 (Viber, Telegram).

## Specifications

| Name | Value |
| --- | --- |
| Panel type | Full-stave |
| Wood species | Ash |
| Thickness | 40 mm |
| Dimensions | 1.2x0.8 m |
| Grade | Rustic |
| Moisture content | 8–10% |

## Delivery

- Collection from the warehouse at: 7d Zdolbunivska St., Kyiv (entrance from Dniprovska Naberezhna embankment, 17)
- Delivery across Ukraine by transport companies

## Payment

- Cash at the warehouse (receipt issued)
- Payment by bank details: Sole Trader or LLC (with VAT)
- Payment by card


---

Other languages:

- [uk](https://wood-way.expert/shop/meblevyi-shchyt/meblevyi-shchyt-yasen/tsilnolamelnyi-meblevyi-shchyt-yasen/tsilnolamelnyi-meblevyi-shchyt-yasen-40mm-1-2x0-8m-rustyk/)
- [en](https://wood-way.expert/en/shop/solid-wood-panels/ash-solid-wood-panels/full-stave-ash-solid-wood-panels/full-stave-ash-solid-wood-panel-40mm-1-2x0-8m-rustic/)
- [ru](https://wood-way.expert/ru/shop/mebelnii-shchit/mebelnii-shchit-yasen/tselnolamelnii-mebelnii-shchit-yasen/tselnolamelnyi-mebelnyi-shchit-yasen-40mm-1-2x0-8m-rustik/)